Answers are grounded in this paper and cite their sources.
Poly( L ‐lactic acid) (PLA) filaments were spun by melt‐spinning at 500 and 1850 mm −1 , and further drawn and heat‐set to modify the morphology of these PLA filaments. PLA yarns were characterized by wide‐angle X‐ray diffraction (WAXD) and sonic method. WAXD reveals that PLA yarns spun at 500 mm −1 are almost amorphous while the PLA filaments spun at 1850 mm −1 have about 6% crystallinity. This is different from PET filaments spun at the same speed that have almost no crystallinity. Both drawn‐ and heat‐set PLA filaments showed much higher crystallinity (60%) than do as‐spun fibers produced at 500 and 1850 mm −1 speed, which is also higher than the usual heat‐set PET yarns. It appears that crystalline orientation rapidly reaches a value in the order of 0.95 at 1850 mm −1 and that drawn‐ and heat‐set yarns have almost the same crystalline orientation values. Molecular orientation is relatively low for as‐spun PLA yarn, and molecular orientation increased to ∼0.5 after drawing or heat–setting or both.
No takes yet. Share an insight, caveat, or question.
Ghosh et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: