Key result
A low-cost, microcontroller-based wireless patient monitoring system was successfully designed to measure heart rate using photoplethysmography and transmit alerts via GSM modem.
Describes the design of a low-cost, microcontroller-based wireless heart rate monitoring system with SMS alerting capabilities.
Answers are grounded in this paper and cite their sources.
May enable remote monitoring in low-resource settings; leaves open clinical validation before adoption.
This project is designed to measure heart beat (pulse count), by using embedded technology. In this project simultaneously it can measure and monitor the patient's condition. This project describes the design of a simple, low-cost controller based wireless patient monitoring system. Heart rate of the patient is measured from the thumb finger using IRD (Infra Red Device sensor).Pulse counting sensor is arranged to check whether the heart rate is normal or not. So that a SMS is sent to the mobile number using GSM module interfaced to the controller in case of abnormal condition. A buzzer alert is also given.
No takes yet. Share an insight, caveat, or question.
Fezari et al. (2015) studied Heart rate monitoring. Microcontroller Based Heart Rate Monitor was evaluated on Heart rate measurement and SMS alert transmission. A low-cost, microcontroller-based wireless patient monitoring system was successfully designed to measure heart rate using photoplethysmography and transmit alerts via GSM modem.
Synapse has enriched 10 related papers. Consider them for comparative context: