Answers are grounded in this paper and cite their sources.
High-speed pulse response and receiver sensitivity at 1.55 μm were measured at data rates ranging from 400 Mbits/s to 2 Gbits/s, in order to elucidate characteristics of a reach-through p+nn- Ge APD. The p+nn- Ge APD receiver provided a 2 Gbit/s received optical power level of -32.0 dBm at 1.55μm and a 10-9error rate, which was 4 dB better than the receiving level with a p+n Ge APD. Detector performance at 1.3μm was also studied for comparison with performance at 1.55μm. Single-mode fibers, which have 0.54 dB/km loss and zero dispersion at 1.55μm, and an optical transmitter-receiver, whose repeater gain is 29.2 dB, have enabled 51.5 km fiber transmission at 2 Gbits/s. The transmission system used in this study has a data rate repeater-spacing product of 103 (Gbits/s) . km at 1.55μm. Optical pulse broadening and fiber dispersion were also studied, using 1.55 and 1.3μm dispersion-free fibers. Future repeater spacing prospects for PCM-IM single-mode fiber transmission systems are discussed based on these experimental results.
No takes yet. Share an insight, caveat, or question.
Yamada et al. (1982) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: