Answers are grounded in this paper and cite their sources.
A determination of the NSL unit of resistance based on standards of length and frequency has been made. A cylindrical cross-capacitor, for which the change in capacitance for a measured change in length may be calculated very precisely, is used to calibrate a number of small fixed capacitors (1/6 or 1/4 pF). AC bridge techniques are used to build up to 10 nF and also to measure the resistance of a 10 kΩ resistor in terms of this capacitance and a measured frequency (ω = 10 4 ). DC measurements are used to relate the 10 kΩ resistor to the Laboratory's 1 Ω standard resistors. The estimated uncertainty in the measurements is 2 in 10 7 but the accuracy of the determination is limited to ± 7 in 10 7 because of the uncertainty in the speed of light. Mean values, derived from a number of determinations, and corresponding to the times of the BIPM international comparisons, are Jan. 1964 Ω NSL = 1 Ω - 3.58 μΩ Feb. 1967 Ω NSL = 1 Ω - 3.80 μΩ. The standard deviation of a series of determinations was 0.06 μΩ.
No takes yet. Share an insight, caveat, or question.
A.M. Thompson (1968) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: