Answers are grounded in this paper and cite their sources.
Wind loads may decrease a heliostat’s optical performance by affecting its shape and orientation. As small scale wind tunnel or numerical models cannot reflect a heliostat’s dynamic behavior entirely, in this study we investigated a real scale Stellio heliostat installed on the DLR heliostat testing platform where it was exposed to the natural wind. The wind-induced response was captured with a dynamic photogrammetry system that combines a high spatial and high temporal resolution. As its application to a heliostat is novel, the first focus of this paper is to validate the applied setup and the accuracy of measured displacements. The second focus is to discuss the wind-induced Stellio behavior. A method is presented which allows for separating the total wind-induced behavior into a tracking- and a slope-relevant part. Based on this separation, the wind-induced tracking deviation (0.44mradRMS) during the investigated measurement period (mean wind speed ≈4.8m/s, mean turbulence intensity ≈26%) reached a level of approximately one third of a heliostat’s typical total tracking deviation. Likewise, during the time step of largest deformations, the wind-induced slope deviation (0.75mradRMS) of the most affected facet reached a level of approximately one third of a Stellio facet’s total slope deviation. However, wind-induced slope deviations occurred only locally and temporally. Furthermore, wind-excited eigenfrequencies were revealed to have a negligible impact on both the tracking and slope deviation in case of the Stellio. Oscillations and deformations related to frequencies below the eigenfrequencies were rather found to have a predominant impact on the optical performance.
No takes yet. Share an insight, caveat, or question.
Blume et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: