Answers are grounded in this paper and cite their sources.
Resistors are essential and ubiquitous building blocks in electronic circuits. Fabrication of printed resistors in a manner compatible with roll-to-roll printing is important for realizing low-cost and high-throughput production of electronic devices. Here we present fully printed resistors fabricated via a novel self-aligned printing method, termed self-aligned capillarity-assisted lithography for electronics (SCALE). Flexible substrates with imprinted features such as reservoirs and capillary channels were prepared by roll-to-roll processing. Functional inks were then delivered sequentially into the reservoirs by inkjet printing and the ink flowed spontaneously into the adjoining channels driven by capillarity. Poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) was used as the resistive material, and silver was used for the electrodes. Using SCALE, we achieved fully inkjet-printed, self-aligned resistors with resistance values ranging over five orders of magnitude while keeping the overall dimensions of the devices constant. We then employed SCALE to build low-pass resistor–capacitor filters with cutoff frequency from 0.4 to 27 kHz and excellent operational stability. Overall, this work expands the potential of self-aligned inkjet printing for producing fully printed electronic circuits.
No takes yet. Share an insight, caveat, or question.
Cao et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: