This is the authors' abstract. We don't add key points for this paper.
We report systematic studies on the foamability of our novel high-melt-strength long-chain branched polypropylene under supercritical CO 2 . Continuous foaming experiments were conducted using a tandem extrusion system and a set of filamentary dies with similar pressure drops but different pressure drop rates. The foam expansion was controlled by varying the temperature at the die exit. Under identical CO 2 loadings, the expansion ratio plotted as a function of die temperature exhibited similar shapes across multiple pressure drop rates. However, the shape of the curve varied across different amounts of CO 2 , under which the highest achievable expansion ratio occurred at a lower die temperature with increasing CO 2 content. The cell density displayed strong dependence on both the pressure drop rate and the amount of dissolved CO 2 . The effect of the latter became more apparent at lower pressure drop rates. The average cell size decreased with increasing CO 2 loading but generally showed weak dependence on pressure drop rate except at the highest value.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: