This is the authors' abstract. We don't add key points for this paper.
The crystallization behaviors of low density polyethylene (LDPE) under ambient N 2 and compressed CO 2 were characterized using high-pressure differential scanning calorimetry (CO 2 pressure ranging from 0.1 to 8 MPa) and high-pressure rheometer (CO 2 pressure ranging from 0.1 to 30 MPa), respectively. The modulus variation during the crystallization characterized by HP-rheometer indicated that there were three typical regions where the modulus was nearly invariable with time corresponding to the crystallization beginning, the modulus increased dramatically corresponding to the crystallization ongoing, and the modulus stabilized at a higher value corresponding to the crystallization ending. The foaming was conducted at different storage modulus while other operation factors such as saturation pressure and temperature were maintained consistent. The results suggested that the crystal would affect the bubble-size distribution and even constrain the bubble growth when the relative crystallinity was more than 50%. Below this value, the crystal could facilitate cell nucleation and improve the melt strength.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: