Answers are grounded in this paper and cite their sources.
We numerically map the joint impact of base thickness (e) and donor density (ND) on silicon heterojunction (SHJ) cells under AM1.5G using SILVACO ATLAS (drift–diffusion with SRH/Auger and field/concentration dependent mobilities). Optics is treated by 2D specular ray tracing (no texturing), so results constitute a conservative baseline at small e. To isolate e and ND, the a Si:H/c Si interface is held fixed across parameter sweeps. We identify an absorption–collection trade off: Jsc increases from thin to moderate e and then saturates or declines; Voc decreases with increasing e and high ND due to enhanced recombination. The fill factor peaks at small e under low to moderate ND. Efficiency exhibits a robust optimum at moderate thickness (e.g., e ≈ 120-160μm) and intermediate ND, whereas heavy doping shifts the optimum but ultimately degrades Voc/FF via Auger (and, in extended models, band gap narrowing). From a design standpoint, we delineate a practical window that balances resistivity and recombination while avoiding heavy doping. Limitations: absence of light trapping and fixed interface, mean our absolute metrics are conservative, but trends and optima are robust. Planned extensions include Lambertian/textured optics, interface sweeps, and calibrated BGN/contact models to raise absolute values without altering the identified trade offs.
No takes yet. Share an insight, caveat, or question.
Toure et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: