Answers are grounded in this paper and cite their sources.
Cu 2 O p−n homojunction solar cells were fabricated by the consecutive electrochemical deposition of p -Cu 2 O layer, followed by n -Cu 2 O layer. The surface morphology of p-type Cu 2 O, which determines the p−n junction interface, was modified to investigate its effect on the performance of the homojunction solar cell. The results showed that the junction quality and the cell efficiency varied significantly depending on the crystals faces exposed at the p−n junction, although the resistivity of the p- and n-layers remained comparable. The best performance of the homojunction cell fabricated in this study was V OC = 0.423 V, I SC = 2.5 mA/cm 2, fill factor (ff) = 27%, and η = 0.29%. The main limiting factor for the cell efficiency was the high resistivity of both p- and n-layers. Doping studies and fine-tuning of the junction morphology will be necessary to improve the performance of the Cu 2 O homojunction solar cells further.
No takes yet. Share an insight, caveat, or question.
McShane et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: