Answers are grounded in this paper and cite their sources.
Polymer infiltration into random nanocrystalline TiO 2 networks is examined using a combination of imaging, surface analysis, and depth‐profiling techniques. Nanocrystalline TiO 2 network substrates were fabricated by established methods; the resulting networks were examined using scanning electron microscopy and found to be typical of those reported in the literature. Regioregular poly[2,2′‐(3‐hexylthiopene)] (rrP3HT) was drop‐cast from solution onto the TiO 2 ‐network substrates. Infiltration of the polymer into the nanoporous TiO 2 network was determined by monitoring the ratio of carbon‐ion signal—by means of secondary‐ion mass spectrometry from a top overlayer of rrP3HT—to the carbon signal from the same polymer within the TiO 2 network. A very low incorporation of polymer was found (0.5 %), even for highly porous (≈ 65 %) networks. Several strategies were used to increase the degree of polymer infiltration, including heat treatment, surface derivatization, and the use of low‐molecular‐weight fractions. A high of 22 % rrP3HT as a percentage of the total volume of a random nanocrystalline film is reported. Previous results for hybrid rrP3HT/random nanocrystalline TiO 2 network devices are examined and analyzed in the context of these findings.
No takes yet. Share an insight, caveat, or question.
Bartholomew et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: