Answers are grounded in this paper and cite their sources.
Combination of sputter deposition and high-temperature annealing is a promising technique for preparing AlN templates with a low threading dislocation density (TDD) at a lower film thickness compared to those prepared by the conventional metalorganic vapor phase epitaxy. However, cracking of AlN films during annealing is a critical issue. In this study, we controlled the residual stress of the sputter-deposited AlN films by modifying the sputtering conditions. Consequently, the occurrence of cracking was effectively suppressed. By optimizing the fabricating conditions, a TDD of 2.07 × 10 8 cm −2 was achieved for the AlN template with a thickness of 480 nm.
No takes yet. Share an insight, caveat, or question.
Uesugi et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: