This is the authors' abstract. We don't add key points for this paper.
A compact and energy-efficient reactor system is essential for advancing hydrogen production technologies based on methanol steam reforming (MSR). However, conventional fixed-bed or externally heated microreactors often suffer from low catalyst utilization, significant heat losses, and poor scalability. In this study, we present a novel flow-through catalytic membrane reactor (CMR) powered by Joule heating in which Cu/ZnO/Al 2 O 3 nanoparticles are immobilized in situ within the microscale pores of a high-thermal-conductivity SiC membrane tube. The system integrates evaporation and reforming zones into a single tube and enables direct internal heating of the catalytic region, minimizing thermal losses and enhancing energy efficiency. Under optimal conditions (300 °C, S/C = 1.5, methanol flow rate = 0.01835 mol min –1 ), the reactor achieved a methanol conversion of 97.55%, a hydrogen volumetric productivity of 157.96 kmol m –3 h –1, and an energy efficiency of 98.61% in the scaled-up design, outperforming conventional porous or foam-supported microreactors. Additionally, the reactor volume required to produce 500 Nm 3 H 2 h –1 was only about 2 m 3, nearly 1 order of magnitude smaller than that of traditional systems. These results demonstrate that the integration of flow-through architecture, catalyst pore confinement, and Joule heating represents a significant advancement in compact, high-efficiency MSR hydrogen production.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: