Answers are grounded in this paper and cite their sources.
The stability and efficiency of organic solar cells (OSCs) were improved using thermally stable fluorine-doped tin oxide (FTO) as the bottom electrode and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and TiO2 as the buffer layers. The TiO2 layer between FTO and the P3HT:PCBM active layer improved the interface characteristics for a better charge transfer. The PEDOT:PSS layer retarded the oxygen diffusion to the active layer. A maximum power conversion efficiency of 4.3% was obtained for the inverted structure of FTO/TiO2/P3HT:PCBM/PEDOT:PSS/Ag with a stable performance, and the cell retained over 65% of its initial efficiency after 500 h. Additionally, the OSCs were fabricated using all-solution based vacuum-free processes with screen printing for the Ag electrode and the results were comparable to the device that used an evaporated Ag electrode.
No takes yet. Share an insight, caveat, or question.
Baek et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: