This is the authors' abstract. We don't add key points for this paper.
The effect of combined addition of V and Mo on hydrogen trapping was investigated using tempered martensitic steels (0.3%C-1.2%Cr-0.5%Mo-0.4%V, 1.5%Mo-0.2%V or 2.0%Mo-0.1%V in mass%), for the purpose of improving hydrogen embrittlement strength. The trapped hydrogen content and the hydrogen trapping energy were evaluated under various tempering conditions and compared with the single addition 0.2%V and 1.0%Mo steels in the previous paper. The trapped hydrogen content and the hydrogen trapping energy of 0.5%Mo-0.4%V and 1.5%Mo-0.2%V steels were higher at 650°C tempering temperature for 1 hour than at 600°C. On the other hand, those values of 0.2%V and 1.0%Mo steels were lower at a tempering temperature of 650°C than at 600°C. This was presumed to be due to the some interaction between V and Mo at a tempering temperature of 650°C. In the 0.5%Mo-0.4%V and 1.5%Mo-0.2%V steels at tempering temperatures of 600°C and 650°C for 1 hour, the plate-shaped Cr enriched cubic (Mo, V)C fine carbides with a width of about 1nm and a length of about 20nm or less were precipitated, and there was no significant difference in the number density. The V/Mo peak ratio of the fine carbides by EDS analysis was higher at a tempering temperature of 650°C than at 600°C and the length of fine carbides was slightly longer. The 2.0%Mo-0.1%V steel was estimated to have less trapped hydrogen content at a tempering temperature of 650°C than at 600°C, similar to single addition steels, because of the smaller V/Mo mole ratio.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Toshiya Kinami (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: