Answers are grounded in this paper and cite their sources.
REBCOcoated conductors have a strong potential for high-field magnet applications. TheREBCOtechnology, however, is still in its infancy for accelerator magnet applications. As part of the U.S. Magnet Development Program (MDP), we developed a six-layer cantedcos θdipole magnet, C3a, usingCORC®wires developed by Advanced Conductor Technologies LLC. All the layers were wound using a semi-automated winding machine. Three layers of the magnet usedCORC®wires containing the SuperPower “AP”REBCOtapes and the remaining layers used the wires containing the “HM” tapes. At 77 K, both kinds ofCORC®wires showed 5% to 10% degradation, after bending to a minimum bend radius of 30 or 35 mm, with respect to the self-field critical current measured before winding. At 4.2 K, the magnet reached 9.5 kA at a ramp rate of 9 A s⁻¹and generated a dipole field of 1.4 T. The critical current of one layer degraded by 4% after a current transient up to 10.5 kA ramped in an averaged rate of 175 kA s⁻¹or 20 T s⁻¹. We confirmed the HMCORC®wire can carry a higher current than the APCORC®wire at 4.2 K. The test results of the C3a magnet showed that the fabrication and assembly procedure can be used for the upcoming full-scale C3 magnet.
No takes yet. Share an insight, caveat, or question.
Abraimov et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: