Answers are grounded in this paper and cite their sources.
Aims To test whether photon-counting detector CT (PCD-CT) improves low-attenuation plaque (LAP) detection compared with energy-integrating detector CT (EID-CT) using a mixed-plaque phantom and full-rotation helical images as high-resolution reference. Methods and results We imaged a custom phantom housing three different sized mixed-plaque inserts (LAP5.5mm, LAP4mm, and LAP7mm) combining iodinated lumen (600/1000 HU), calcified arcs (200/800 mg/cc), and a narrow LAP central strip (1–1.5 mm, 75 HU), embedded in a fat-equivalent ring (−60 HU). Polychromatic and virtual monoenergetic images (40/70/100/130 keV) were reconstructed with soft (Qr40) and sharp (Qr72) kernels and quantum iterative reconstruction (QIR) levels. Findings were compared with a clinically used EID-CT protocol. HU line profiles and edge-width-at-half-maximum (EWHM) at the iodine–phantom interface were measured. Reference EWHM was 0.125 mm. Cardiac half-rotation Qr40 reconstructions yielded EWHM 0.68–0.75 mm, whereas Qr72 approached reference values (0.18–0.23 mm). In LAP5.5mm, the 1-mm LAP layer was detectable on standard and UHR images with sharp kernels and higher QIR, with best attenuation fidelity using Qr72. For the smallest LAP4mm, only Qr72/QIR2 resolved the 1-mm LAP component, although measured attenuation remained elevated because of blooming from adjacent iodine and calcium. In LAP7mm, Qr72/QIR4 most closely reproduced the nominal LAP attenuation. Lower-keV images (40–70) increased LAP masking from iodine. EID-CT did not clearly depict LAP4mm. Conclusion PCD-CT provides superior spatial resolution and HU fidelity for detecting LAP, particularly when using UHR images combined with sharp kernels (Qr72) and higher iterative strength (QIR 2–4). LAP detection improved at 130 keV vs. lower energies.
No takes yet. Share an insight, caveat, or question.
Szilveszter et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: