Answers are grounded in this paper and cite their sources.
Solid propellant grain serves as one of the core components of solid rocket motors (SRMs). Accurate quantitative characterization of its mechanical properties under in-service conditions across a broad range of temperature and strain rate is of critical importance. Owing to the ductile failure characteristics of solid propellant, damage initiation strength stands out as one of the most vital mechanical parameters, signifying the onset of an unstable state in the microstructure of the material. In this study, a method for determining the theoretical elastic modulus of solid propellant was established based on the thermo-viscoelastic constitutive theory. Furthermore, by integrating the force-heat equivalence energy density principle, a novel temperature and strain rate dependent damage initiation strength model was derived, which requires no fitting parameters. Meanwhile, a series of uniaxial tensile tests and stress relaxation tests were performed at various temperatures (223–343 K) and strain rates (6.667×10 -4 –1.667 s -1 ), through which the damage initiation strength and the master curve of relaxation modulus were acquired. Subsequently, the proposed strength model was validated against experimental data, and comparative analyses were conducted between the proposed theoretical model and the conventionally measured experimental elastic modulus. Additionally, the influence of "zero time" on prediction accuracy was discussed in detail. The results demonstrate that the damage initiation strength increases with rising strain rate and decreases with elevating temperature. The developed strength model enables precise prediction of the damage initiation strength over wide ranges of temperature and strain rate. For the prediction of instantaneous mechanical responses, the consideration of "zero time" parameter is indispensable. The linear viscoelastic model can be adopted to predict the strain rate-dependent theoretical elastic modulus and damage initiation strength at a given temperature. This research provides a new theoretical model basis for the prediction of damage initiation strength of solid propellant in engineering failure assessment.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: