Answers are grounded in this paper and cite their sources.
The desulfurization of blast furnace gas (BFG) is highly desired by iron and steel enterprises to realize its resource utilization with no environmental pollution. In this work, spent activated coke (SAC) modified by NaOH was innovatively reused as an efficient material for the removal of carbonyl sulfide (COS) and sulfuretted hydrogen (H 2 S) from BFG with admirable breakthrough sulfur capacities of 126.58 and 141.62 mg/g, respectively, and 100% removal efficiency of both COS and H 2 S could be reached with the total sulfur capacity of COS and H 2 S as high as 116.60 mg/g in the purification of the simulative BFG gas. The removal behaviors manifested that the removal process included catalytic hydrolysis of COS to H 2 S and subsequent oxidation of H 2 S to immobilize these sulfur species in the form of S 8 . The multiple structural characterizations (X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), H 2 -temperature-programmed reduction (TPR)) further revealed that the surface carbonyl and pyridine/pyrrolic groups together with the loaded hydroxyl ion enhanced the COS hydrolysis and the subsequent oxidation of H 2 S. The modified SAC possessed much richer pore structures and active groups than either fresh activated coke (FAC) or high specific surface area activated carbon (HAC). At the same time, a recycling scheme suitable for SAC after removing H 2 S and COS was proposed. The demonstrated excellent simultaneous removal capacity of COS and H 2 S over the modified SAC will provide a promising technical route for desulfurization of BFG with high efficiency and low cost.
No takes yet. Share an insight, caveat, or question.
Ma et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: