Answers are grounded in this paper and cite their sources.
In accordance with the EU RoHS Directive, the use of Sn–3 mass%Ag–0.5 mass%Cu lead-free solder (SAC305) has become the standard in the manufacturing of electronics. Since SAC305 contains more tin than the conventional tin-lead eutectic solder, erosion of the Fe plating frequently occurs on a hand soldering iron tip and a point soldering machine nozzle. In this study, to extend the life of the Fe plating layer, we investigated the applicability of a composite plating in which Fe is combined with the boron nitride (BN) compounds. We used BN particles as the bulk material, and boron nitride nanotubes (BNNT) as a nanomaterial, to fabricate the regarded composite materials. A solderability test and an erosion resistance test were conducted on the composite plating layer, made of both Fe-BN particles and Fe-BNNTs composites. In the solderability test, the spreading factor of SAC305 on the Fe-BN particle and on the Fe-BNNT composite platings were about the same as, or a little decreased compared to, that of the bare Fe plating. The SAC305 solder was not repelled by either composite plating. In the erosion resistance test, the Fe-BNNT composite plating performed the best, and had the lowest erosion depth. The erosion depths of the Fe-BN particle composite plating and the Fe plating ranged from about 6 to 24 times greater, respectively, than those of the Fe-BNNT composite plating layer, confirming that, in a nanomaterial BNNT-base, composite diffusion of Fe into SAC 305 can be suppressed.
No takes yet. Share an insight, caveat, or question.
Watanabe et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: