Self-standing Fe ₃ O ₄ decorated paper electrode as a binder-free trifunctional electrode for electrochemical ammonia synthesis and Zn–O ₂ batteries

The conversion of the abundant biodegradable material into electroactive electrode material can be a good resource for sustainable energy conversion and storage applications. Herein, we present a simple, cost-effective and green approach for the fabrication of a flexible cellulose paper electrode using an electroless-electrodeposition method. The one-step electroless deposition route is followed to induce conductivity into a non-conductive cellulose paper substrate without using any expensive activators or sensitisers. The Fe3O4 is then electro-deposited as an active catalyst over the conductive paper substrate for use in electrochemical activities. The as-fabricated paper electrode shows promising activity and stability during the dinitrogen reduction reaction (NRR) as well as oxygen bifunctional electrocatalysis. A faradaic efficiency of 4.32% with a yield rate of 245 μg h-1 mgcat-1 at -0.1 V is achieved for NRR whereas a very small overpotential of 180 mV is required to reach 10 mA cm-2 during OER, and the ORR reaction starts at the onset potential of 0.86 V. The practical applicability of the paper electrode is validated by assembling a Zn-O2 battery showing a peak power density of 81 mW cm-2 and a stability up to 35 h during charge-discharge cycles, which can power the NRR to produce NH3 under full cell conditions.