Answers are grounded in this paper and cite their sources.
Aerospace and defence components demand coatings with high corrosion resistance, low thermal conductivity, wear resistance, and low friction coefficient to endure extreme conditions like aerodynamic heating, freezing temperatures, moisture, salt exposure, ultraviolet radiation, and mechanical loads. Electrodeposition provides dense, adhesive coatings but faces challenges in homogeneity, scalability, and environmental impact. This review explores co‐deposition methods that uniformly disperse two‐dimensional nanomaterials into metallic coatings, examining their properties, integration principles, and electrodeposition kinetics to enhance coating performance. Subsequently, the influence of effective parameters, viz., current density (4–20 mA cm −2 ), electrolyte composition, agitation (ultrasonication/magnetic/mechanical), pH (1.5–4.5), and temperature (25–200 °C), on the properties of the final deposits is summarized. Experimental findings reported to date demonstrate that integrating 2D materials substantially reduces corrosion rates (<1.5 mmpy) when compared to metal coatings (around 3.5 mmpy), improved thermal conductivity >450 W m −1 K −1 (around 50%), while concurrently achieving up to 75% reduction in coefficient of friction (<0.03). Thus, with the use of green electrolytes, renewable energy sources, and the realization of closed‐loop recycling of electrolytes, this technique can be employed for critical components, including gun barrels, recoil springs, landing gears, bearings, pistons, impellers, and fins, in defense and aerospace for sustainable development.
No takes yet. Share an insight, caveat, or question.
Sowmiyanarayanan et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: