Answers are grounded in this paper and cite their sources.
Metallic nanowire aerogels are a class of low‐density metamaterials that combine the properties of metals with the high porosity of aerogels. In the current work, Ag and Cu nanowire aerogels with densities between 20 and 810 mg/cm 3 were investigated using lock‐in thermography during sequential mechanical compaction and nanowire diameter. Thermal diffusivity was shown to decrease as the diameter was reduced from 60 nm to 30 nm, likely due to surface scattering once the diameter became comparable to the electron mean free path. Surprisingly, increasing the aerogel density by 30× through compaction reduced the thermal diffusivity by nearly 300×, opposite of the expected trend. Further analysis revealed that this decrease is dominated by the Euclidian thickness term embedded within the diffusivity formalism. Analysis of the characteristic thermal diffusion timescale showed that thermal equilibration became modestly faster during compaction, consistent with densification that collapses pore volume while changing the effective conductive pathway much less. Large geometric compression produces small changes in the percolative transport through the material. Altogether, these results demonstrate that highly porous nanowire aerogels cannot always be treated as homogeneous bulk media, because their macroscopic geometry and conductive network evolve differently during compaction, with the underlying nanostructure governing the collective thermal transport.
No takes yet. Share an insight, caveat, or question.
Maben et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: