Answers are grounded in this paper and cite their sources.
In this study, dense Cr–Nb and Cr–V binary composite carbide layers were successfully fabricated on GCr15 steel via the powder pack cementation technique, and the microstructure, mechanical properties, and dry sliding wear behaviors of the composite carbide layers were investigated. The results show that the as‐prepared composite carbide layers are mainly composed of (Cr, Fe) 7 C 3 . All the composite carbide layers have a thickness of more than 16 μm and a microhardness higher than 1500 HV 0. 3 . The Cr–Nb composite carbide layer exhibits excellent toughness, with the optimal bonding strength grade reaching HF1; the Cr–V composite carbide layer exhibits higher bonding strength, with its critical failure load LC 2 exceeding 40 N. As the Cr–Fe content decreases and the Nb–Fe/V–Fe content increases, the specific wear rate of the composite carbide layers shows a decreasing trend. Based on the analysis of the worn surface morphology and phase composition, it is found that under the relatively high load of 30 N, corundum‐type composite oxides, spinel‐type composite oxides, and graphite‐like structures are readily formed in situ at the friction interface. These products play a self‐lubricating role during the sliding process, thereby effectively reducing friction and wear.
No takes yet. Share an insight, caveat, or question.
He et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: