This is the authors' abstract. We don't add key points for this paper.
Mechanized harvesting remains a major bottleneck for sustainable Cerasus humilis production because lodging-prone branches and fragile fruit make conventional small-fruit harvesters difficult to adapt. To address this crop-specific constraint, we developed a low-damage self-propelled electric harvesting system that integrates branch lifting, comb-type stripping, screw conveying, self-propelled travel and electrohydraulic height adjustment. The key working modules were analyzed, and a four-factor, three-level Box-Behnken field experiment was used to optimize travel speed and the rotational speeds of the branch-lifter, stripping and conveying motors. Travel speed had the strongest effect on harvesting rate, whereas stripping speed had the strongest effect on fruit damage. The optimized operating settings were a travel speed of 0.2 m/s, a branch-lifter speed of 104.6 r/min, a stripping motor speed of 22 r/min and a conveying motor speed of 137.4 r/min. Five validation tests under these settings achieved a mean harvesting rate of 82.12% and a mean damage rate of 2.79%, compared with predicted values of 81.26% and 2.80%, respectively. These results indicate that coordinated electric control of branch lifting, comb-type stripping and fruit conveying enables sustainable low-damage field harvesting of C. humilis under the tested cultivar and site conditions.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
He et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: