Answers are grounded in this paper and cite their sources.
In this letter, we investigate a metalization process for reducing the contact resistance on undoped GaN layers. The Si metal source was diffused successfully into the GaN films by using SiOx/Si/GaN/Al2O3 structures. By using a high-temperature annealing process, we diffused and activated the Si atoms into the GaN film. This caused a heavy doped n-type GaN layer to be formed near the GaN surface. Under high temperatures, such as a diffusion process at 1000 °C, the as-deposited Ni/Al/Ti contact had good ohmic properties and a low specific contact resistivity (ρc) of 1.6×10−3 Ω cm2. Rapid thermal annealing the contact at 800 °C for 30 s caused the ρc to decrease rapidly to 5.6×10−7 Ω cm2. The Ni/Al/Ti contact characteristics on the GaN films diffused at various temperatures are also discussed.
No takes yet. Share an insight, caveat, or question.
Lin et al. (2000) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: