Answers are grounded in this paper and cite their sources.
Lithium–sulfur (Li–S) batteries with high energy density are promising for next-generation energy storage but suffer from poor cycle life due to instability of the lithium anode. Commercial graphite anodes used in lithium-ion batteries could be viable for replacement of lithium metal as anode in Li–S batteries. However, graphite anodes are incompatible with the commonly used ether-based electrolytes in Li–S batteries due to the Li + ion and solvent co-intercalation into graphite interlayers, which leads to exfoliation. Here, we report the stabilisation of graphite anode by in-situ formation of quasi-solid-state electrolyte (QSSE) in Li–S batteries. The QSSE is formed by the ring-opening of molecular ethers induced by metallic molybdenum disulfide sulfur cathode host to produce long-chain polymers. The resulting gel polymer matrix exhibits ionic conductivity (1.51 mS cm −1 ) comparable to that of liquid electrolyte and provides sufficient redox chemistry for the sulfur cathode without co-intercalation into the graphite anode. Li–S pouch cells based on in-situ formed QSSE and graphite anode show a specific capacity of ~ 1200 mAh g −1 and 90.3% capacity retention after 200 cycles. Our design addresses the electrolyte limitation associated with graphite anode, enabling graphite to be used in ether-based solvents for safe, cost-effective and stable Li–S batteries.
No takes yet. Share an insight, caveat, or question.
Li et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: