Answers are grounded in this paper and cite their sources.
The interaction between cemented laminae and induced fractures plays a critical role in hydraulic fracture propagation within laminated shale reservoirs. By combining mode-I fracture mechanics experiment conducted on semi-circular bend (SCB) specimens of black carbonaceous shale from the marine Longmaxi Formation with numerical simulations, this study systematically investigates the effects of three key geological parameters: (1) bond strength, (2) vein stiffness, and (3) approach angle on fracture propagation characteristics. The key findings are summarized as follows: (1) Increasing the parallel bond strength promotes fracture crossing behavior. When the vein fracture toughness was reduced to 0.3, 0.2, and 0.1 times that of the shale matrix, fractures exhibited increased deflection tendency along the vein, creating longer stepped propagation paths. (2) For stiffer veins, induced fracture divert into the vein and propagate over longer distances; Additionally, more micro-cracks form within the vein before fracture-vein interaction occurs. (3) Fracture-vein interaction exhibits significant angular dependence: At approach angles between 60° and 90°, fractures predominantly penetrated laminae without deflection; Below 60°, fractures initially diverted into the vein but subsequently re-entered the matrix before reaching the vein terminus. This bifurcation pattern closely resembles laboratory observations of weakly cemented or pre-damaged vein specimens. • Experimental and numerical methods are used to study shale fracture behavior with different bedding properties. • As The parallel bond strength increased, the tendency of fracture interaction was toward crossing. • The induced fracture diverted into the vein but the fracture propagated through the vein with a longer distance for the vein with a higher stiffness. • When the angle between the texture and the loading direction is 60°–90°, the cracks extend through the laminae without deflect into the laminae basically. • When the angle between the texture and the loading direction is less than 60°, the induced fractures first diverted into the vein but kinked back into the rock matrix before propagating to the end of the vein.
No takes yet. Share an insight, caveat, or question.
Dong et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: