Answers are grounded in this paper and cite their sources.
Instead of the usual sputtered anhydrous tungsten oxide thin films, a powder of monohydrated tungsten oxide (WO3.H2O) was used for the making of an electrochromic infrared emissivity modulator. The WO3.H2O powder was embedded in a porous plastic matrix before being laminated with other appropriate layers of the battery-like device, leading then to a complete flexible emissivity modulator. The widely open structure of the hydrated tungsten oxide makes lithium intercalation easier, which is particularly suitable for the realization of plasticized devices. Compared to a classical battery assembly, a porous plastic graphite layer laminated with a conductive grid was sandwiched between the WO3.H2O and the electrolyte layers. Such an original device allowed both a perfect uniformity in current collection and a sufficient porosity for the liquid electrolyte displacement. The complete device demonstrated a satisfying electrochemical behavior under 1 mV/s potential sweeps, allowing the insertion of a large amount of lithium ions into the WO3.H2O structure. Hemispherical reflectance measurements were carried out both over the VIS/NIR (0.4–2.5 μm) and the mid-infrared (2.5–25 μm) spectral ranges. Reflectance over the 2.5–25 μm spectral range was found to switch from 2% to 32% upon intercalation of 0.65 Li per tungsten. This value is comparable to previous literature results obtained for rigid devices.
No takes yet. Share an insight, caveat, or question.
Bessière et al. (2002) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: