This is the authors' abstract. We don't add key points for this paper.
Here, the attenuation loss effect and laser performance enhancement of Nd:YAG transparent ceramics were investigated. Using a 0.6 at.% Nd:YAG ceramic rod of 3 mm diameter and 65 mm length, the scattering coefficient and absorption coefficient at 1,064 nm were measured to be 0.0001 cm −1 and 0.0017 cm −1 , respectively. For the 808-nm side-pumped laser experiment, an average output power of 44.9 W was achieved with an optical-to-optical conversion efficiency of 26.4%, which was nearly the same with that of a 1 at% single crystal. Adopting the 885-nm direct end-pumped scheme, the following laser tests demonstrated a high optical efficiency of 62.5% and maximum output power of 144.8 W obtained at an absorbed pump power of 231.5 W. This was until now the highest optical conversion efficiency acquired in an Nd:YAG ceramic laser to our knowledge. It proves that high-power and high-efficiency laser output could be generated by a high-optical quality Nd:YAG ceramic rod along with the 885-nm direct pumping technology.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Chang et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: