Answers are grounded in this paper and cite their sources.
We report the photovoltaic performances and kinetics of femtosecond fluorescence for three zinc-porphyrin sensitizers ( YD0 − YD2 ) coadsorbed with chenodeoxycholic acid (CDCA) at three molar ratios on nanocrystalline semiconductor (TiO 2 or Al 2 O 3 ) films. The addition of CDCA improved the efficiencies of YD0 and YD1 so that their maximum performance occurred at a dye/CDCA ratio of 1:2, but the presence of CDCA had a negative effect for YD2 . Porphyrin aggregation on TiO 2 surfaces not only accelerates the rate of intermolecular energy transfer but also increases the rate of interfacial electron injection, so that the electron injection yields (Φ inj ) are balanced by these two important factors. As a result, Φ inj increased slightly with increasing amount of CDCA for both YD0 and YD1, but decreased for YD2; for this reason, the presence of CDCA failed to improve the photovoltaic performance for YD2, unlike for YD0 and YD1 . The cell performances were optimized on TiO 2 films of ∼10-μm thickness with a scattering layer of ∼4-μm thickness: the efficiencies of power conversion of YD1 and YD2 are slightly smaller than, but near, that of N719, being 6.5% and 6.8%, respectively, compared to 7.3%. Without a scattering layer on the films, the performance of N719 was degraded significantly (6.3%), whereas the efficiencies of YD1 and YD2 decreased only slightly (6.4% and 6.6%), making this series of green sensitizers promising candidates for future light-penetrable photovoltaic applications.
No takes yet. Share an insight, caveat, or question.
Lu et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: