Answers are grounded in this paper and cite their sources.
The aim of this research is to investigate the influence of turbocharger boost pressure on combustion, performance, and emission characteristics of a bi-fuel spark-ignition engine operating with clean gaseous fuels. Turbocharging is widely recognized as an effective strategy to compensate for torque and power losses associated with bi-fuel operation. However, the boost pressure strongly depends on engine speed and load, necessitating a detailed evaluation of its effects under different operating conditions. Computational fluid dynamics simulations were conducted to analyze in-cylinder pressure and temperature variations at two operating points based on turbocharger response. At 6000 rpm , the turbocharger provided the peak boost pressure, reflecting maximum charging efficiency. At the low-end torque point (1500 rpm), the effect of boost pressure was negligible, and engine behavior resembled a naturally aspirated mode. Results showed that biogas use reduced the in-cylinder peak pressure by approximately 8–12% and delayed the mean burned fraction under both operating points. Biogas also altered pressure evolution during the rapid and controlled combustion phases, shifting CA50 and CA90 by about 3° CA retarted. Additionally, the lower combustion temperature associated with biogas operation decreased NOx emissions by more than 10% compared to compressed natural gas. A key finding was that turbocharger boost pressure produced a significant improvement in mixture formation when utilizing CNG and biogas fuels. These results demonstrate that, in downsized gaseous spark-ignition engines, turbocharging plays a critical role in preserving engine power and torque output, even when operating with fuels of lower methane number such as purified biogas.
No takes yet. Share an insight, caveat, or question.
MostasharShahidi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: