This is the authors' abstract. We don't add key points for this paper.
This paper describes a novel heterojunction bipolar transistor (HBT) structure, the collector-up tunneling-collector HBT (C-up TC-HBT), that minimizes the offset voltage V/sub CE,sat/ and the knee voltage V/sub k/. In this device, a thin GaInP layer is used as a tunnel barrier at the base-collector (BC) junction to suppress hole injection into the collector, which results in small V/sub CE,sat/. Collector-up configuration is used because of the observed asymmetry of the band discontinuity between GaInP and GaAs depending on growth direction. To minimize V/sub k/, we optimized the epitaxial layer structure as well as the conditions of ion implantation into the extrinsic emitter and post-implantation annealing. The best results were obtained when a 5-nm-thick 5/spl times/10/sup 17/-cm/sup -3/-doped GaInP tunnel barrier with a 20-nm-thick undoped GaAs spacer was used at the BC junction, and when 2/spl times/10/sup 12/-cm/sup -2/ 50-keV B implantation was employed followed by 10-min annealing at 390/spl deg/C. Fabricated 40/spl times/40-/spl mu/m/sup 2/ C-up TC-HBTs showed almost zero V/sub CE,sat/ (<10 mV) and a very small V/sub k/ of 0.29 V at a collector current density of 4 kA/cm/sub 2/, which are much lower than those of a typical GaInP/GaAs HBT. The results indicate that the C-up TC-HBT's are attractive candidates for high-efficiency high power amplifiers.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Pan et al. (2000) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: