Answers are grounded in this paper and cite their sources.
BEAMOS, beam addressed metal oxide semiconductor, is an electron-beam-addressed semiconductor digital mass-memory device. Its operation is based on electron-beam writing of stored charge in an unstructured MOS layer and electron-beam reading of this stored charge through its effect on the surface-recombination velocity of the oxide silicon interface. The surface-recombination velocity controls the diffusion of electron-beam-generated carriers in the n layer of the np diode underlying the oxide layer. This control of carrier diffusion by surface-recombination-velocity patterns is the unique feature of the BEAMOS target concept. The data storage capacity of BEAMOS-type devices is limited by the electron-beam spot size and target construction. A model of the target resolution (bit packing density) is described which includes the effects of incident beam spot size, electron scattering in the target layers, and injected minority-carrier diffusion in the n layer of the target. Measurements of electron-beam scattering are summarized and applied to the writing and reading mechanisms of the target. The minority-carrier diffusion equation is solved by a relaxation method similar to the method of sources. This leads to a model for the target bit packing density, which includes both electron scattering and minority-carrier diffusion. For present BEAMOS targets, the dominant limitation is shown to be minority-carrier diffusion, which can be controlled by the n-layer thickness. Predictions of the model are compared with measurements on actual targets. The ultimate packing density of the concept is also discussed. Packing densities of more than 2×107 bits/cm2 have been demonstrated, and densities as high as 109 bits/cm2 may be possible.
No takes yet. Share an insight, caveat, or question.
G. E. Possin (1977) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: