Answers are grounded in this paper and cite their sources.
The fabrication process that was used to develop a multichip Josephson computer named ETL-JC1 is described. The ETL-JC1 consists of four Josephson LSI chips: a register arithmetic logic unit chip (RALU), a sequence control unit chip (SQCU), a 1280-b read-only memory chip (IROU), and a 1-kb random access memory chip (DRAU). The fabrication process, based on a 3- mu m Nb/AlO/sub x//Nb junction technology, has been developed to make a complete set of the Josephson LSI chips. The present fabrication process includes a trilayer tunnel junction formation, a Nb underlayer method, a self-aligned insulation method, a reactive ion etching (RIE) process, an etching stopper layer formation, and a superconducting contact formation. The Josephson critical current density was controlled by the oxidation time within the fluctuation of +or-20% in the LSI fabrication runs. The resistors were made of palladium metal film on the LSI chips. The sheet resistance was controlled within the fluctuation between -12.5% and +19% in the LSI runs. It was found that the Josephson LSI chips fabricated by this process showed a high reliability for a long-term storage at room temperature and thermal cyclings between 4.2 K and room temperature without any passivation layers on the LSI surface.
No takes yet. Share an insight, caveat, or question.
Nakagawa et al. (1991) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: