Answers are grounded in this paper and cite their sources.
The properties of 100-nm-thick Ti55N45 and Ti45N55 films as diffusion barriers between silicon substrates and thin Cu films were studied by sheet resistance measurements, Rutherford backscattering spectrometry, Auger electron spectroscopy, secondary-ion mass spectrometry, transmission electron microscopy, scanning electron microscopy, energy dispersive x-ray spectroscopy, x-ray diffractometry, and diode leakage current measurements. For unpatterned Si/titanium nitride/Cu samples, all the layers were intact and there was no indication of interdiffusion by conventional depth profiling techniques up to 700 °C for Ti55N45 and 900 °C for Ti45N55 after 30 s rapid thermal anneal in N2, respectively. Leakage current measurements did not show deterioration of diode junction (with junction depth of 0.25 and 0.30 μm) up to 650 °C for Ti55N45 and 800 °C for Ti45N55. The improvement in failure temperature of the N-rich Ti45N55 diffusion barrier is a result of the lower defect density and a more stable feature furnished by nitrogen stuffed at the defects.
No takes yet. Share an insight, caveat, or question.
Wang et al. (1990) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: