Answers are grounded in this paper and cite their sources.
We investigated the effect of using a synthetic ferrimagnetic (SyF) free layer in MgO-based magnetic tunnel junctions (MTJs) on current-induced magnetization switching (CIMS), particularly for application to spin-transfer torque random access memory (SPRAM). The employed SyF free layer had a Co40Fe40B20/Ru/Co40Fe40B20and Co20Fe60B20/Ru/Co20Fe60B20structures, and the MTJs (100 times (150-300) nm2) were annealed at 300degC. The use of SyF free layer resulted in low intrinsic critical current density (Jc0) without degrading the thermal-stability factor (E/kBT, whereE,kB, andTare the energy potential, the Boltzmann constant, and temperature, respectively). When the two CoFeB layers of a strongly antiferromagnetically coupled SyF free layer had the same thickness,Jc0was reduced to 2-4 times106A/cm2. This lowJc0may be due to the decreased effective volume under the large spin accumulation at the CoFeB/Ru. TheE/kBTwas over 60, resulting in a retention time of over ten years and suppression of the write current dispersion for SPRAM. The use of the SyF free layer also resulted in a bistable (parallel/antiparallel) magnetization configuration at zero field, enabling the realization of CIMS without the need to apply external fields to compensate for the offset field.
No takes yet. Share an insight, caveat, or question.
Hayakawa et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: