Answers are grounded in this paper and cite their sources.
The electrical contact to two-dimensional (2D) semiconductor materials is decisive to the electronic performance of 2D semiconductor field-effect devices (FEDs). The presence of a Schottky barrier often leads to a large contact resistance, which seriously limits the channel conductance and carrier mobility measured in a two-terminal geometry. In contrast, Ohmic contact is desirable and can be achieved by the presence of a nonrectifying or tunneling barrier. Here, we demonstrate that a nonrectifying barrier can be realized by contacting indium (In), a low work function metal, with layered InSe because of a favorable band alignment at the In–InSe interface. The nonrectifying barrier is manifested by Ohmic contact behavior at T = 2 K and a low barrier height, Φ B = 50 meV. This Ohmic contact enables demonstration of an on-current as large as 410 μA/μm, which is among the highest values achieved in FEDs based on layered semiconductors. A high electron mobility of 3700 and 1000 cm 2 /V·s is achieved with the two-terminal In–InSe FEDs at T = 2 K and room temperature, respectively, which can be attributed to enhanced quality of both conduction channel and the contacts. The improvement in the contact quality is further proven by an X-ray photoelectron spectroscopy study, which suggests that a reduction effect occurs at the In–InSe interface. The demonstration of high-performance In–InSe FEDs indicates a viable interface engineering method for next-generation, 2D semiconductor-based electronics.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: