Answers are grounded in this paper and cite their sources.
Fiber-reinforced polymer (FRP) materials have been increasingly used for external strengthening of reinforced concrete (RC) infrastructure. However, the focus has been almost exclusively on epoxy-based composites, and other potential options such as polyurethane (PU) have not been fully investigated. This paper characterizes the flexural behavior of concrete strengthened with PU matrix–adhesive laminates using small-scale single lap shear specimens, unreinforced flexural specimens, and large-scale RC girders. Experimental results demonstrate that although the normal and shear strengths of PU-based adhesives are low, PU-strengthened beams show increased strength and deformability, owing to the load redistribution ability within the bond line. It is found that a linear brittle bond–slip model adequately predicts the interfacial shear behavior of the PU adhesive, exhibiting a lower stiffness and comparable cohesive energy to epoxy. Finite element (FE) analysis was performed to validate the effect of the bond–slip model relative to the experimental results.
No takes yet. Share an insight, caveat, or question.
Al-Jelawy et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: