Answers are grounded in this paper and cite their sources.
Blends of polypropylene (PP) and low density polyethylene (LDPE) were prepared by both batch mixing followed by compression molding and extruder compounding followed by injection molding. Compression molded PP‐LDPE blends were found to have very poor toughness, whereas extruded blends, injection molded without weld lines, were quite tough. Injection molded blend specimens with weld lines were found to be weaker and failed at very low elongations at break. A simple adhesion analysis is presented which explains well the weakness at the weld line expected for incompatible blends. Addition of an ethylene‐propylene polymer with residual ethylene crystallinity was found to be a more effective “compatibilizer” for blends deficient in toughness than a related copolymer with less crystallinity. This effect is attributed to the more block‐like character of the former which permits it to play more nearly the interfacial role required of the ideal blend compatibilizing agent.
No takes yet. Share an insight, caveat, or question.
Nolley et al. (1980) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: