Answers are grounded in this paper and cite their sources.
Adhesive bonding of timber – concrete composites (TCC) offers improved structural performance compared to mechanical connectors but is often limited by slow curing under ambient conditions. This study investigates the suitability of the two-component epoxy adhesive SikaPower®-880 for temperature-assisted bonding using integrated conductive heating. Curing behavior was analyzed by differential scanning calorimetry (DSC) and rheology, while tensile tests on bulk adhesive specimens and compressive-shear tests on TCC specimens evaluated mechanical performance. The results demonstrate a strong temperature dependence of curing kinetics. Increasing the curing temperature from 60°C to 80°C reduces the time to reach a degree of cure of α = 0.7 from approximately 26 min to 12 min. Compared to ambient curing (23 °C), where similar conversion requires hours to days, this represents a substantial acceleration. The glass-transition temperature (Tg) increases with curing temperature up to 80°C, consistent with increased cross-link density. At higher temperatures, thermally induced degradation occurs, indicated by reduced Tg, decreased tensile strength, and porosity formation. At the structural level, curing at 80°C improves characteristic shear strength and reduces scatter. The results indicate that curing at approximately 80°C provides an effective balance between accelerated curing and avoidance of thermal degradation.
No takes yet. Share an insight, caveat, or question.
Hilse et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: