This is the authors' abstract. We don't add key points for this paper.
A wafer-scale metal self-rolled-up membrane platform has been proposed for the design and fabrication of radio-frequency on-chip lumped passive components, which is demonstrated on a commercial 4-inch sapphire batch fabrication line. Compared to the traditional methodology including planar or SiNx based self-rolled-up membrane processing technologies to obtain the most basic passive lumped components, such as inductors and capacitors on the chip, this platform enables more compact three-dimensional construction of the component device structure with higher electrical performance. For demonstration, batches of wafer-scale RF inductors and capacitors are fabricated through precise design based on electromagnetic analysis. Measurement results show that radio-frequency inductor samples obtain inductance of 0.6 nH~3.4 nH and a maximum quality factor of 3.1 ~ 7.3 with the largest inductance density of 2.26 \,μ H/mm² , and a typical RF capacitor sample show capacitance of 0.5 pF with the largest capacitance density of 1528.4 pF/mm² . After post electroplating, coper layer thickness of a 1.1 nH inductor is increased to be ~ 2.7 μm from 120 nm with the inner diameter of 80 μm, and the maximum quality factor is significantly increased to 18 @ 1.4 GHz. Standalone inductors can be successfully cut off from a 4-inch sapphire wafer by using laser modification cutting. A wafer-scale self-rolled-up membrane platform is developed for radio-frequency on-chip passive components like inductors and capacitors on a 4-inch sapphire wafer. The authors demonstrate compact metal self-rolled-up membrane inductors with improved inductance and higher quality factor achieved by post-electroplating.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: