Answers are grounded in this paper and cite their sources.
The molecular weight dependence of zero-shear viscosity (η 0 ) of polystyrene- block -polyisoprene (SI diblock) copolymer in the disordered state was investigated. For the investigation, a series of lamella-forming, nearly monodisperse SI diblock copolymers were synthesized via sequential anionic polymerization, and order−disorder transition temperatures ( T ODT ) of the block copolymers were determined from isochronal dynamic temperature sweep experiments at an angular frequency (ω) of 0.01 rad/s and also from dynamic frequency sweep experiments over a wide range of temperatures. The η 0 of the SI diblock copolymers in the disordered state (at T > T ODT ) was determined from η 0,r = lim ω → 0 [| (ω)|], for which logarithmic plots of reduced complex viscosity | (ω)| vs a T ω with a T being temperature-dependent shift factor were first prepared, where | (ω)| is defined by | (ω)| = |η*(ω)|( T r ρ r / T ρ)/ a T in which |η*(ω)| is the complex viscosity at ω, T is the measurement temperature, T r is a reference temperature defined by T r = T g,PS + 104 °C with T g,PS being the glass transition temperature of the polystyrene phase, and ρ and ρ r are the densities at T and T r, respectively. The molecular weight ( M ) dependence of η 0 for the SI diblock copolymers in the disordered state is found to follow the relationship η 0 ∝ M 1.15±0.09 for M < M c and η 0 ∝ M 4.69±0.18 for M ≥ M c, where M c is the viscosity critical molecular weight at which the slope of η 0 vs log M plot changes abruptly. Also investigated, for comparison, was the molecular weight dependence of η 0 for nearly monodisperse homopolystyrenes, which were synthesized via anionic polymerization, and it is found that η 0 ∝ M 1.21±0.23 for M < M c and η 0 ∝ M 3.37±0.21 for M ≥ M c, which is in excellent agreement with the literature. Further, the molecular dependence of steady-state recoverable compliance ( ) of SI block copolymer in the disordered state was determined from = lim ω → 0 J ‘(ω) for which logarithmic plots of dynamic storage compliance J ‘(ω) vs a T ω were first prepared, where J ‘(ω) is defined by J ‘(ω) = G ‘(ω)/[( G ‘(ω)) 2 + ( G ‘ ‘(ω)) 2 ]. The M dependence of for the SI diblock copolymers in the disordered state is found to follow the relationship ∝ M 1.63±0.17 for M < M c, and ∝ M 5.22±0.78 for M ≥ M c . The much stronger molecular weight dependence of η 0 and for the disordered SI diblock copolymers than that for homopolystyrenes observed in this study is attributable to the styrene−isoprene junction effect that originates from the difference in the monomeric friction coefficients between polystyrene and polyisoprene blocks.
No takes yet. Share an insight, caveat, or question.
Choi et al. (2003) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: