Answers are grounded in this paper and cite their sources.
This study experimentally and numerically investigates passive pre-chamber combustion of pure ammonia in an internal combustion engine. The goal of the work is to explore how pre-chamber geometry ameliorates combustion characteristics of ammonia, including low flame speed and low reactivity, under low- and mid-load conditions. The results demonstrate that very stable combustion (CoV IMEPg < 1%) at 25% relative indicated load (near idle) is possible with an appropriate pre-chamber geometry at 1200 and 1800 RPM, respectively. An 8-hole, 1.1 mm diameter nozzle with A/V ratio of 2.4 was shown to be too small for low-load at 1200 RPM and exhibited two separate instability mechanisms. Poor pre-chamber gas exchange led to variable jet magnitude and timing that was nearly twice as variable as the other configurations. The 1.1 mm nozzle also produced a turbulent jet quenching effect in the main-chamber that caused poor re-ignition stability. The numerical results confirm a stronger presence of highly turbulent thickened flame regime in the main-chamber with the 1.1 mm nozzle with an average Karlovitz number of 320.4 compared to the 178.6 of the 1.6 mm nozzle. At 1800 RPM, the 8-hole, 1.6 mm diameter nozzle was no longer stable, but only produced instability linked to turbulent jet quenching. The results demonstrate that hole size and A/V ratio must both be considered when choosing pre-chamber configurations and that properly sized nozzle geometry can enable low load operation.
No takes yet. Share an insight, caveat, or question.
Voris et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: