Answers are grounded in this paper and cite their sources.
Cold-drawn uniplanar-axially oriented sheets of nylon 6 have been annealed at 195°C, hot-rolled at 130°C, and then chemically treated with phenol to form the α crystalline phase. The morphology is parallel-lamellar, with the molecular chains at right angles to the lamellar plane. The long period is 96.7 ± 0.7 Å. The extensional compliances S33 (parallel to the draw direction) and S11 (the transverse direction in the sheet) and the shear compliances S44, S55, and S66 have been measured at 20.0 ± 0.3°C by dead-loading creep and torsional methods, in two relative humidity ranges, 0–10% and 61–69% RH. Dependence upon time (creep), strain, and humidity have also been determined. The extensional compliances show the cross-over of S33 above S11 when the αa transition or Tg is reduced to below room temperature by increasing the relative humidity from zero to 65%. The results are explained by using Takayanagi models for the extensional compliances and interlamellar shear or crystallite shear for the shear compliances.
No takes yet. Share an insight, caveat, or question.
Lewis et al. (1980) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: