Answers are grounded in this paper and cite their sources.
In continuation of our previous study on production of high-strength metallurgical coke from torrefied softwood (cedar), we studied coke production from a mixture of torrefied cedar (TC) and noncaking coal by pulverization to sizes <100 μm, mixing, binderless hot briquetting, and carbonization. These sequential processes produced coke with a tensile strength of 5–17 MPa, which was equivalent to or greater than that of conventional coke (5–6 MPa), from TC-coal mixtures over the entire ranges of TC mass fraction in briquette of 0–100%, torrefaction temperature of 250–300 °C, and choice of coal (sub-bituminous or medium-volatile bituminous coal). The mixing of TC and coal hindered densification of coke due to hindrance of shrinkage of more-shrinkable TC-derived particles during the carbonization under many of the conditions. Nevertheless, positive synergy occurred in the coke strength at TC mass fractions of over 50%, where coal-derived particles were dispersed in the matrix of TC-derived particles, bonded to them during the carbonization, and behaved as a reinforcement of the matrix. The bonding between TC-derived and coal-derived primary particles was revealed by scanning electron microscopy. Copulverization of mixed TC and coal to sizes <40 μm before the briquetting gave cokes having strengths as high as 23–28 MPa. The fine pulverization increased the frequencies of mutual bonding of TC-derived particles and coal-derived particles and bonding between TC-derived and coal-derived particles per coke volume. The strength of coke from the TC-coal mixture generally followed volume-based additivity of strengths of cokes from TC and coal. This was realized by mixing primary particles of TC and coal within ≈10 μm scale or even smaller.
No takes yet. Share an insight, caveat, or question.
Wibawa et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: