Answers are grounded in this paper and cite their sources.
In the present work, low-temperature fired MnxNi0.5−xCu0.25Zn0.25Fe2O4 + Bi2O3 (x = 0.0 to 0.45) was synthesized by the sol-gel auto combustion technique at a temperature of 1073 K. Bi2O3 (with 2 wt. %) was used as a sintering aid for improving the density, microstructure and lowering the sintering temperature of Mn-Ni-Cu-Zn ferrites. Synthesized samples were investigated for their structural, magnetic, and electrical properties such as density, porosity, saturation magnetization, and permeability as a function of Mn2+ substitution. Permeability and saturation magnetization were found to increase with the replacement of Ni2+ with Mn2+. Bulk density of 4.5 g/cm3 was observed for Mn-Ni-Cu-Zn ferrite with Bi2O3 additives which is greater than that of pure Mn-Ni-Cu-Zn ferrite (4.1 g/cm3). Saturation magnetization of NiCuZn ferrite increased from 37 to 63 emu/g with increase in Mn2+ substitution. Mn substituted NiCuZn ferrite shows higher complex permeability (μ′ = 672) than that of the pure NiCuZn ferrite (μ′ = 433). Curie temperature determined from temperature dependent permeability data shows that Tc attains maximum value of 707 K.
No takes yet. Share an insight, caveat, or question.
Shirsath et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: