This is the authors' abstract. We don't add key points for this paper.
It is possible to enhance energy density in sodium-ion batteries by increasing the cutoff voltage, however, high voltage operation brings challenges to the performance of cathode materials. The integration of honeycomb-like superlattice structures into cathode materials has the potential to enhance high-voltage performance; yet, the risk of irreparable structural damage occurring under extreme voltage conditions cannot be ignored. This study introduces a high valence element, Nb, in an innovative manner, using its induced elemental segregation effect, to implement a modification strategy for P2–Na 0.80 Li 0.13 Ni 0.20 Mn 0.67– x Nb x O 2 superlattice structure cathodes. This strategy includes surface alkali treatment, coating layer design, sodium vacancy control, and crystal structure improvement to develop an enhanced performance cathode with a voltage range of 1.5–4.5 V. It is noteworthy that doping bring about the production of C 2/ m symmetric Na 3 NbO 4 compounds with distinctive [NbO 5 ] and [NaO 5 ] five-coordination structures. This structures not only enhanced interfacial stability but also improves the ion transfer efficiency. The strategy increases the initial discharge specific capacity to 196.3 mA h g –1, facilitating the formation of a stable lithium manganese superlattice structure cathode capable of functioning across a broad voltage range. After 100 cycles at 0.5 C, the capacity retention rate is 88.3%, and very good rate performance (93.1 mA h g –1 at a high rate of 5 C). This study presents a new design for cathodes in sodium-ion batteries.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Li et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: