Answers are grounded in this paper and cite their sources.
An rf sputtering process was used without postdeposition annealing to prepare Sn-doped In/sub 2/O/sub 3/ films with low electrical resistivity (down to 2 x 10/sup -4/ ohm-cm), high visible transmission, and high infrared reflectivity (up to 93 percent at 10 ..mu..m) for applications as transparent conductors and heat mirrors. Substrate heating is accomplished entirely by the electron bombardment intrinsic to rf sputtering, rather than by using an auxiliary resistance heater. The film properties improve with increasing substrate temperature up to 650/sup 0/C, the maximum employed, and are relatively independent of other sputtering parameters. The electrical and optical properties of the films do not depend significantly on the crystallographic orientation, degree of texture, or substrate material.
No takes yet. Share an insight, caveat, or question.
Fan et al. (1975) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: