Experimental study reveals >98% ethylene selectivity during ethanol dehydration over phosphorus-modified H-ZSM-5 catalysts, highlighting a durable pathway for bio-based chemical production.
Phosphorus (P) modified H-ZSM-5 catalysts were prepared by wet impregnation method by varying P loadings from 0 to 7.43 wt % using phosphoric acid (H 3 PO 4 ) as the P source. The catalysts were tested for ethanol dehydration in the temperature range of 523−723 K. The P-modified catalysts were found to be highly active and selective toward ethylene at 673 K and atmospheric pressure. In addition, the P-modified catalysts were found to be extremely stable more than 200 h without any sign of deactivation. However, the selectivity was found to be strongly dependent on several factors such as P content, reaction temperature, and space velocity (WHSV). The P-modified ZSM-5 catalysts were also found to be highly active for the dehydration of aqueous ethanol solutions (10 wt %) showing very high ethylene selectivity (above 98%) at significantly lower temperature 623 K. The catalysts were thoroughly characterized using various methods, including N 2 physisorption, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric differential thermal analysis (TG-DTA), 1 H, 27 Al, and 31 P magic angle spinning nuclear magnetic resonance (MAS NMR), and amonia temperature programmed desorption (NH 3 -TPD). 27 Al MAS NMR spectra suggest that P addition facilitate the breaking of Si−O−Al bond that lead to a partial dealumination. NH 3 -TPD results indicate that total acidity as well as density of high strength acid sites were decreased with P loading.
No takes yet. Share an insight, caveat, or question.
Ramesh et al. (2010) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: